Finding the Right Parts for Your Faucet

Working on faucets

A leaky faucet is the most common household plumbing problem.

repair your faucet partsYou may spend more time finding the correct parts than working on the faucet, says the experts at Santa Cruz plumbing. To prevent multiple shopping trips, remove the worn parts – perhaps even the whole faucet – and take them with you to the Santa Cruz plumbing supply or home improvement center.  Hundreds of faucet types have been made by many different manufacturers. It is possible to have an unusual model with parts that are hard to find.

If your faucet has a brand name inscribed on its body, look for a repair kit to match. Otherwise dismantle the faucet to find out its type. In some cases only inexpensive O-rings and washers are needed. Other times a main part – a cartridge, stem, or ball, for instance – needs to be replaced. Usually replacing the inner workings results in a faucet that works as smoothly and is as durable as a new faucet, according to the Duncan plumbing specialists.

If parts are hard to find or expensive, or if the faucet is unattractive, you may be better off replacing the whole faucet rather than repairing it. This will depend on the type and age of the faucet, replacing may take less time.

WHAT CAN GO WRONG: To save getting frustrated, place a towel into the sink (to catch any small parts that may fall) and place a cloth next to you on the counter and lay the parts out in the order you remove them. When reassembling, simply reverse the order – faucet parts are small.

Not every plumbing need, needs a plumber!  When you do, we will exceed your expectations!

We Take Care of All Your Plumbing Needs.
Request Service

Scott Duncan

1 Comment

  1. Harper Campbell on August 7, 2017 at 6:09 am

    It’s good to know that when it comes to fixing a leaking faucet that there are ways to go about finding the parts to have it fixed. I like how you pointed that one way to go about doing it is to see if the brand we own has a repair kit that matches it, that way we can make sure we have the right parts for it. This will really help make the process go smoother.



Leave a Comment





Recent Posts